HellVape MD RTA
Hellvape MD RTA heralds a new era of customization for MTL RTA Tanks. Finding the perfect level of restriction in a vape is a very personal choice as each vaper has their own preference. With this in mind, Hellvape have created a 24mm rebuildable tank with 24 different airflow settings.
On the base of the Hellvape MD RTA is a knurled airflow control ring with 6 different options. The holes are combined into two MTL Modes:
MTL Mode 1
#1 = 0.8mm
#2 = 1.0mm
#3 = 1.2mm
MTL Mode 2
#4 = 1.6mm
#5 = 1.8mm
#6 = 2.0mm x 4mm
And the customization doesn't finish there. On the bottom of the build deck, there is an interchangeable turntable with two different airflow designs. To switch between them you simply rotate the turntable 180° using the provided screwdriver. Turntable A's two options are one 3.2mm x 1.0mm sized airflow and an alternative three 0.8mm diameter holes. Turntable B has one large 4.0mm x 2.0mm airflow and a honeycomb option with four 0.6mm holes and three 0.8mm holes.
Although the Hellvape MD RTAs main focus is for MTL it can also be used as a direct lung tank. There are two drip tips included in the package, an MTL tip and a wide bore drip trip (for direct lung). There are two prebuilt coils, a 0.7 Ohm for DL and 1.2 Ohm for MTL.
MDs tank capacity as standard is 2mL but if you want to increase it there is a 4mL bubble glass included. Note that the additional bubble glass increases the diameter to 27mm.
The drip tip acts as a childproof lock of the tank, to refill you need to remove the drip tip and slide back the top cap to reveal the fill slot.
There are 4 colors to choose from: Black, Black & Gold, Blue & Gold and our favorite Stainless Steel.
Hellvape are the masters of the rebuildable tank and the MD RTA sets a new high standard.
Hellvape MD 24mm RTA Specification:
- 24 x 48.95mm(2mL glass + MTL tip)
- 27 x 44.15mm(4mL glass + Wide bore drip tip)
- Capacity: 2mL or 4mL
- Interchangeable Turntables
- 24mm Dual Post Build deck
- Removable Driptips (510 + wide-bore)
- 6 Airflow options
- 0.7Ohm + 1.2 Ohm Coils
Colors: Black, Black & Gold, Blue & Gold, Stainless Steel
Hellvape MD 24mm RTA Contents Include:
- 1x Hellvape MD RTA
- 1x Spare Drip tip
- 1x Alternative Turntable
- 1x 0.7 Ohm Pre-built Coil
- 1x 1.2 Ohm Pre-built Coil
- 1x Bubble Glass
- 1x Accessory Bag
- Spare Screws
- Spare O-Rings
- 1x Hellvape Sticker
- 1x User Manual